D100x140 More about our new Vermeer drilling rigs
With a maximum rotary torque output of 14,000 ft-lb (18,981.5 Nm) and rotational speeds up to 203 rpm, the D100x140 horizontal directional drill offers an exceptional punch in response to the most challenging projects. The rig can use 15-ft or 20-ft (4.6-m or 6.1-m) lengths of 3.5-in (8.9-cm) Firestick drill rod.
OPEN-TOP VICE
An angled, open-top vice allows for the passage of larger tooling. Because of the large opening, operators can also use it to break out tooling.
STACKABLE ROD BOXES
Stackable rod boxes are easy to use with a single pin and patent-pending auto lock
DRILL EFFICIENTLY
The D100x140 S3 features the DigiTrak Aurora full-colour touchscreen display, delivering an engaging experience, which helps make a driller’s day more productive.
OPTIONAL ONBOARD CRANE
With the option of an onboard knuckleboom style crane to reduce the amount of support equipment needed on site
INCREASE YOUR RANGE
Unique four-bar linkage rack and additional pads allow operators to set up entry angles of 11-24 degrees – increasing the range attainable with tracks fully on the ground.
FIRESTICK DRILL ROD
Experience the difference that has made one-piece forged Firestick drill rod the industry benchmark.
D100x140 S3 NAVIGATOR®HORIZONTAL DIRECTIONAL DRILL Specifications
GENERAL WEIGHTS AND DIMENSIONS
Min transport length (15 ft [4.6 m] rod option): 31.4 ft (9.5 m)
Min transport length (20 ft [6.1 m] rod option): 36.4 ft (11.1 m)
Min transport width: 102 in (254 cm)
Min transport height: 11.5 ft (3.4 m)
Min weight (15 ft [4.6 m] rod option): 50,300 lb (22,815.7 kg)
Min weight (20 ft [6.1 m] rod option): 52,500 lb (23,813.6 kg)
ENGINE
Make/Model: Caterpillar
Fuel type: Ultra-low sulfur diesel
Max engine rpm: 2200 rpm
Gross horsepower: 275 hp (205 kW)
Cooling method: Liquid
Aspiration: Turbocharged
Emissions rating: Tier 4 Final (EU Stage V)
OPERATIONAL
Thrust/Pullback: 100,000 lb (444.8 kN)
Max carriage speed: 205 fpm (62.5 m/min)
Max spindle torque (low at max engine rpm): 14,000 ft-lb
(18,981.5 Nm)
Max spindle speed: 230 rpm
Max ground drive speed: 1.7 mph (2.7 km/h)
Noise level at operator’s ear: 82 dB(A)
FLUID CAPACITIES
Fuel tank: 115 gal (435 L)
Hydraulic tank: 80 gal (302.8 L)
DRILLING FLUID OPTION ONE (APLEX)
Max flow: 200 gpm (757 L/min)
Max pressure: 1,000 psi (6.9 MPa)
DRILLING FLUID OPTION TWO (KERR)
Max flow: 230 gpm (870.6 L/min)
Max pressure: 1,100 psi (7.6 MPa
OPTIONAL CRANE
Weight: 2,600 lb (1,179.3 kg)
Max lifting capacity at 13 ft (3.95 m): 5,070 lb (2,300 kg)
Max lifting capacity at 19.5 ft (5.95 m): 3,970 lb (1,800 kg)
Rotation: 360°
Max reach: 19.5 ft (5.95 m)
FEATURES
Drilling lights: Standard
Stakedown system: Optional
Remote ground drive control: Standard
Strike alert: Standard
Remote lockout: Standard
DRILL PIPE OPTION ONE
Type: Firestick drill rod
Length: 15 ft (4.6 m)
Joint diameter: 4.375 in (11.1 cm)
Pipe diameter: 3.5 in (8.9 cm)
Weight: 261 lb (118.4 kg)
Min bend radius: 197 ft (60 m)
Rod carrying capacity: 135 ft (41.1 m) with permanent rod box,
270 ft (82.3 m) with stacked box
DRILL PIPE OPTION TWO
Type: Firestick drill rod
Length: 20 ft (6.1 m)
Joint diameter: 4.375 in (11.2 cm)
Pipe diameter: 3.5 in (8.9 cm)
Weight: 374 lb (169.6 kg)
Min bend radius: 197 ft (60 m)
Rod carrying capacity: 180 ft (54.9 m) with permanent rod box,
360 ft (109.7 m) with stacked box
OPTIONAL STAKE DOWN
Spade Stakedown
Aggressive Rotary Stakedown
Weight: 1,000 lb (454 kg)
