D60x90 – More about our new Vermeer drilling rigs
The D60x90 S3 Navigator® horizontal directional drill is significantly more powerful and quieter than its predecessor — with the interactive Aurora® digital display to help get the job done faster and more efficiently.
This machine packs all these valuable benefits into a modest footprint.
With up to 60,000 lb (266.9 kN) of thrust and pullback — an impressive 17 hp (13 kW) increase over its previous model (D60x90 Navigator® horizontal directional drill) — the D60x90 S3 is the drill that will take productivity to a whole new level.
IMPRESSIVE SIZE-TO-POWER RATIO.
The D60x90 S3 boasts up to 60,000 lb (267 kN) thrust/pullback and 9,000 ft-lb (12,202.4 Nm) of rotational torque at just 100″ (254 cm) wide and 26′ long (7.9 m), so it’s qualified for a range of installation specifications even in congested urban sites.
INCREASED POWER. The D60x90 S3 boasts a sizeable 17 hp (12.7 kW) increase over its predecessor, the D60x90, giving operators more power for drilling in difficult ground conditions.
SIGNIFICANTLY QUIETER. The D60x90 S3 has a guaranteed sound power rating of just 107 dBA – 12 dBA lower than its predecessor the D60x90 – resulting in reduced noise at operator’s ear [83 dBA], increased operator comfort and less noise disturbance in residential or urban areas.
LARGE OPEN-TOP VISE DESIGN. The D60x90 S3 features a large open-top vise design for the purpose of removing and adding tooling.
CONVENIENT ROD LOADING. Easy-to-operate and reliable rod loader is inspired by the popular and proven D24x40 Series II design.
AURORA™ TOUCHSCREEN DISPLAY.
Interactive, full-color display provides real-time location information plus tools to complete drilling activities more efficiently, and can replace the need for hard copy bore plans.
D60x90 S3 NAVIGATOR HORIZONTAL DIRECTIONAL DRILL Specifications
GENERAL WEIGHTS AND DIMENSIONS
Min transport length: 29.5′ (9 m)
Min transport width: 100″ (254 cm)
Min transport height: 104″ (264.2 cm)
Weight: 39,000 lb (17,690.1 kg)
ENGINE
Make/Model: CAT 7.1
Fuel type: Ultra low sulfur diesel
Max engine rpm: 2200 rpm
Gross horsepower: 202 hp (151 kW)
Max torque: 642 lb-ft (870 Nm)
Displacement: 433.3 cu-in (7.1 L)
Cooling method: Liquid
Aspiration: Turbo Charged
Emissions rating: Tier 4 Final (EU Stage IV)
OPERATIONAL
Thrust/Pullback: 60,000 lb (266.9 kN)
Max carriage speed at max engine rpm: 175 fpm (53.34 m/min)
Max spindle torque (low at max engine rpm): 9000 ft-lb (12,204 Nm)
Max spindle speed at max engine rpm: 200 rpm
Min bore diameter: 6″ (15 cm)
Max ground drive speed at max engine rpm (fwd): 3.7 mph (6 km/h)
Noise level at operator’s ear: 83 dBA
Drill rack angle: 12°-15° (21.3%-26.8%
DRILLING FLUID SYSTEM
Max flow: 150 gpm (567 L/min)
Max pressure: 900 psi (6.2 MPa)
FEATURES
Breakout system: Standard top load hydraulic vise
Drilling lights: Standard
Flow indicator: Standard
Stakedown system: Optional
Strike alert: Standard
Remote lockout: Standard
DRILL PIPE OPTION ONE
Type: Firestick® drill rod
Length: 15′ (4.6 m)
Rod diameter: 2.875″ (7.3 cm)
Weight: 180 lb (81.7 kg)
Bend radius: 168.7′ (51 m)
Onboard capacity: 600′ (182.9 m)
DRILL PIPE OPTION TWO
Type: Firestick drill rod
Length: 15′ (4.6 m)
Rod diameter: 3.5″ (8.9 cm)
Weight: 250 lb (113.5 kg)
Bend radius: 197.7′ (60 m)
Onboard capacity: 360′ (109.7 m)
